Velvet matt water-based acrylic paint for your interior walls.
What's in it for you
- Non-porous
- Easily cleanable
- Covers well
- Dries quickly
- Indoor air quility: class A+
Trimetal Magnacryl Velours - Wall paint
Velvet matt water-based acrylic paint for your interior walls.
Description
Magnacryl Velours is a velvet-matt water-based wall paint for interior use. The paint is easy to apply, so you will cause little or no splashing.
The paint has a non-porous nature, making it easier to clean and maintain your walls. In addition, Magnacryl Velours dries quickly. So you can apply several coats in one day.
Another advantage: this paint has a long open time and a good flow so you are sure to get a smooth end result.
Applicable on walls, partitions, ceilings, brick, wallpaper, plaster and related products, such as concrete and decorative plaster.
Key features
- Easy to apply, without splashing
- Not porous
- Ready to use and quick drying
- Practically odourless
- Not porous, which makes the dirt adhesion superficial and makes cleaning and maintenance easier
- Improved whiteness and opacity
- IAQ or indoor air climate emission: class A +
Ordered before 4 pm, shipped the same working day
Which shipping methods can you choose from?
- Service Point Delivery: An environmentally friendly choice if you pick up your package(s) by bike or walking, or simply handy when you can't be at home.
✅ free for orders above € 75; otherwise € 4,95 - Home Delivery: have your products delivered at home or at any address you choose, by PostNL or Bpost/DHL.
✅ free for orders above € 75; otherwise € 6,95 - Collect in store in our service point in Stekene (Belgium) is also possible. Stekene is located near the southern border of the Netherlands, nearby towns such as Hulst and Koewacht.
✅ always free
Can I return this product?
Application method: | Paint brush, Paint roller |
---|---|
Coverage: | 13 m²/l |
Gloss level: | Other / special |
Purpose: | Ceiling, Walls |
Base: | Water-based |
Interior / exterior: | Interior |
Area: | Basement, Bathroom, Bedroom, Garage, Hallway, Kitchen, Living room |
Characteristics: | 1-component, Low odour, Quick drying, Water vapor permeable |
Product type: | Topcoat |
How to apply Trimetal Magnacryl Velours?
You can use a paint roller or a brush to apply the paint.
Preparation: Cover anything you don't want to paint and tape down the edges. Next, make sure your wall is clean and free of grease. You can do this with Berdy Clearline.
Application: If your wall has already been painted once and looks clean and undamaged, you can start. This paint is best applied with a paint roller. Start with the hardest-to-reach corners. Important: roll in different directions to avoid streaking.
Do you have a damaged wall and want to paint it with Trimetal Magnacryl Velours? Then buy a matching primer such as magnaprim. Then consult our practical guide: painting walls.
Want to try painting the ceiling too? See also our next steps >>
Which colours for Magnacryl Velours?
Trimetal Magnacryl Velours ofcourse exists in white, but we can also mix this indoor wall paint for you in just about any colour you want: Trimetal colours, NCS colours, RAL colours, but also colours from other paint brands. As long as you don't ask us for a digital colour, you'll be fine!
One of the most requested colours is RAL 9010, a warm shade of white. Warm colours are your cup of tea? Then Brave Ground and Stone will also appeal to you.
Check them out below and click on the paint tin for more inspiration!
Not sure if we can mix your favourite colour? Contact us!